Azure Altea Homes 2,exclusive luxurious villas in Altea, model Tempo

Description of villa

Villa Tempo, a house designed to share, cosy and bright, in one of the most exclusive areas of Altea. 

The entrance is on the top floor, where the first thing we see is the amazing sea view through a large window. This is the heart of the house that joins all the floors, whether via lift of via stairs, and with the parking area, which fits two vehicles. The middle floor is where the three bedrooms of this villa are, two of them are en-suite and have spacious wardrobes and access to a shared terrace. The third bedroom, considered the main bedroom, is equipped with a large walk-n-closet, an en-suite bathroom with a bath so this bathroom becomes an experience of ultimate relaxation, a private terrace and the bed is placed so you wake up gazing at the sea.

The lower floor is intended for the communal areas, you can make the most of any moment in a unique space or as separate rooms. The kitchen stands out due to its large centre island where the cooking area is and an area for breakfast or a quick snack. Villa Tempo has another two areas where you can have a leisurely lunch or dinner. The outside dining area is covered by a large porch, with a barbecue and the inside dining area open up into the house´s living room and into the main terrace. Different environments but connected: kitchen, dining room, inside living room, outside living room, a reading area and a main terrace with a never ending swimming pool.

A design open to the outside, because when the villa´s views are so amazing you don´t have any other choice but to allow them to invade every corner of your home.


Details of villa

Development:
Azure Altea Homes 2
Model:
Villa TEMPO
Bedrooms:
3
Bathrooms:
5
M2 vivienda:
467 m2
M2 parcela:
1046 m2
Price:
PILOTO
Quality:
Superior
Style:
Modern
Ref.:
HB204
Estimate:
20252

These images are illustrative and correspond to the selected model adapted to a certain plot, consequently, being built on this plot will imply changes on the facades and components, resulting from adapting it to the land. This project is subject to its adaptation to the modifications derived from the changes in the Technical Building Code, contemplated in the Royal Decree 732/2019, recently entered into force, that could pose technical changes and/or in its price.

Plans

SIT
DIS-3
DIS-1
DIS-2

Contact us

For more information, please fill out the form below.

 

Development

After more than fifty-eight years at the top of the sector of luxurious real estate, VAPF means exclusivity, quality and innovative building design. An experience expressed in Azure Altea Homes 2, our last luxurious villas project on Sierra de Altea.

Big luxurious independent villas, with a design where the sea views and natural light are the main characters. We can´t forget the exterior areas and terraces, which are so important to be able to enjoy the wonderful Mediterranean climate. Villas with large open spaces, modern and versatile. Built with the most exquisite selection of materials and finishes, and its energy efficiency are only a few of their exceptional features. Customization is a key feature in this residential area. It allows the homeowners to adapt the designs to their own necessities, or to create their own villas next to the sea.

Surroundings and amenities

Azure Altea Homes is an enclosed residential complex, only homeowners can access it, with excusive independent villas, with a communal security system at the entrance.

Large luxurious villas with an incredible location, next to Altea Club de Golf, next to the beach “de la Olla” and the Sports Marina “Campomanes”. It is also only 8 km from Altea´s city centre and it is next to Altea La Vella, two towns traditionally well-known for their quality of life, services and cultural and artistic choices. You can practice sports, carry out cultural activities, as well as enjoying a wide variety of restaurants with a gastronomic choice second to none.

It also had direct access from the motorway “del Mediterraneo” exit AP7-64.

Building specifications

CONSTRUCTION
STRUCTURE
Structure formed by pillars and joists out of reinforced concrete with slab floors with concrete joists and arched lightened concrete bricks, as to technical project.
EXTERIOR WALLS
Façade closure consisting of outer wall of 11 cm thick ceramic brickwork, air chamber with insulating mineral wool panels and inner wall of 7cm thick ceramic brickwork, according to technical project.
INTERIOR WALLS
Inner partition walls made of 7 cm thick ceramic brickwork.
FLAT ROOFS
Non-trafficable flat roof, with a inclination provided by concrete layer, gravel finish and masonry perimeter railing, depending on the villa model.
Thermal roof insulation with extruded polystyrene insulation boards over an EPD type rubber waterproofing layer.
INSULATION
Thermic insulation of the floor inside the house by fitting approved insulating panels on floor slabs and covering with a layer of selflevelling concrete prior to tiling.
Thermic insulation of the floor inside the house by using polistyrene units in the first floor slab.
Thermal insulation of terraces above the property with extruded polystyrene insulation boards over an EPD type rubber waterproofing layer.
SURFACING
External walls surfaced with waterproof, textured cement mortar rendering with combed finish, painted with decorative plastic paint of a colour chosen by the client, according to technical project
Interior walls surfaced with sprayed plaster with smooth finish, painted with plastic white paint, except kitchen and bathrooms, according to technical project.
Continuous false ceiling made of laminated plaster panels, PLADUR system or similar, according to technical project
ELECTRICAL FITTINGS
GENERAL
Fitted electrical installation carried out in accordance with the electronic regulations for low tension, with first quality make fuse box, prepared for contracting 9,2 kw, as to technical project.
SWITCHES AND SOCKETS
Aluminium or Anthracite-coloured electrical switches and sockets from the SIMON series 75 or JUNG series LS 990.
PLUMBING
GENERAL
Hot and cold water installation with embedded piping in compliance with current applicable regulations, with closed loop hot water circuit, main shutoff valve and independent shutoff valves for each bathroom.
SANITARY HOT WATER
Solar energy water heating system, aided by an ALTHERMA by DAKIN auxiliary system.
WASHINGMACHINE
Washing machine connection, as to plan.
DISHWASHER
Dishwasher connection in the kitchen
SANITARY WARE
Bathroom fittings series STARK 2 by DURAVIT in white.
Bathroom fittings series CARO in white by DURAVIT in the main bathroom.
BATHTUB
2ND FLOOR model DURAVIT acrylic bath tub measuring 170x75 cm, in white, according to technical project.
SHOWERBASE
Acrylic 100x85 shower tray model 2ND FLOOR by DURAVIT, in white, according to technical project
BATHROOM FITTINGS
Single handle chromed mixer tap from the TENSO series by GROHE, for bathroom washbasin and bidet. Automatic drain system.
Bath tub and shower taps with thermostatic mixers in chrome from the TENSO series by GROHE.
BATHROOM ACCESSORIES
TENSO by DURAVIT bathroom accessories in chrome : towel rail, toilet paper holder and coat hook.
KITCHEN SINK
Kitchen sink out of stainless steel model X-TRA 100 by ROCA with one basin and drainer.
KITCHEN FITTINGS
Single handle chromed mixer tap on the kitchen sink from the K4 series by GROHE, with swivel spout and pull-out hose.
KITCHEN FITTINGS
KITCHEN FURNITURE
Made to measure kitchen modules with wall hung and base cabinets with doors, fully extending drawers and deep drawers with braking system. Lacquered, veneered or solid wood fronts, melamine cupboard rears and standard handles or knobs. [Series 6-8]
WORKTOPS
Kitchen worktop in Silestone or granite -Castaño, Kinawa, Multicolor, Apache or Copacabana types- with 45º angled edge.
ELECTRICAL HOUSEHOLD APPLIANCES
FRIDGE
Combined fitted fridge, with exterior dimensions 1772x559mm, model "K 9753 iD" by MIELE or similar make
OVEN
Multifunction oven with timer, finished in white or stainless steel, model "H 4318 BP ED/Clst" by MIELE, or similar
COOKER
Induction hob model "KM 6310" by MIELE, or similar
EXTRACTOR HOOD
Decorative 90 cm wide extractor hood finished, stainless steel finish, model P-401 V.850 by PANDO, or similar.
MICROWAVE OVEN
Built-in microwave oven in stainless steel finish, model "M 8261-2 ED/CIst" by MIELE, or similar.
AIR CONDITIONING AND HEATING
GENERAL
Simultaneous air conditioning and hot water production system by ALTHERMA of DAIKIN, made up of an exterior heat pump and an interior Hidrokit, that can be connected to Fan Coils of Air conditioning and to Radiant floor heating.
AIR CONDITIONING
Air conditioning via installation of internal wall, floor, ceiling or ducted FAN COIL units, connected to the ALTHERMA system by DAIKIN, for generating cold air in lounge and bedrooms, according to the technical project
HEATING
Under floor heating in the property consisting of a hot water circuit installed beneath the floor tiles, powered and supplied by the ALTHERMA by DAIKIN system. Basic temperature control on each floor
VENTILATION
Ventilation system of the dwelling by means of the installation of air inlet grilles in the facades of lounge and bedrooms, with mechanical extraction of the interior air through pipes from the kitchen and bathrooms towards the chimney on the roof.
TELECOMMUNICATION INSTALLATION
SERVICE POINT CONNECTION (PAU)
Device where the house's interior network is centralized, made up by different connection points (TV, TF, TLCA, PT) that allows users the possibility of accessing the different services provided by the operators.
TELEVISION (TV)
Cabled installation for television from the living room, kitchen and bedrooms to the user access point as per plan.
TELEPHONE (TF)
Cabled installation for telephone from the living room and bedrooms to the user access point, as per plan.
TELECOMMUNICATIONS (TLCA)
Computer connection point RJ45 lead by cable to the UAP from the living room, kitchen and bedrooms, as to plan.
OTHER INSTALLATIONS
SOLAR COLLECTORS
Solar thermal panels to produce hot water in compliance with the current regulations.
ALARM
Alarm system consisting of the basic Kit installation formed of the central alarm box with anti-sabotage protection detector, keyboard control, 2 movement detectors and remote control, posible connection to alarm reply centre.
EXTERIOR CARPENTRY
GENERAL
Top quality exterior windows and doors of Iroko wood or lacquered aluminium with thermal break by TECHNAL, SHUCCO or similar, double glazing with CLIMALIT air chamber, solar control, low emissions, tilt-and-turn mechanisms on kitchen and bathroom window
MAIN DOOR
Top quality reinforced front door on access to the property with frame fitted with anti-prise catches to anchor it to the wall. Safety hinges and anti-theft lock, in PVC with RAL lacquer finish or wood grain finish, according to technical project.
WINDOW PROTECTIONS
Window protections on accessible areas with galvanised wrought iron grilles, laminated safety glass or Mallorca-style shutters, according to technical project
ROLLERSHUTTERS
Aluminium roller blinds lacquered to match the exterior carpentry, with electrically operated, according to technical project.
INTERIOR CARPENTRY
WARDROBES
Fully lined wardrobes with modular melamine interiors, equipped with drawers, shelves and a rail, 2.2 m high sliding doors matching the interior room doors or made of lacobel type glass, according to technical project.
ROOMDOORS
Windowless single hinged interior doors, wood veneered or lacquered solid panels, with hidden hinges, with a choice of several different designs and finishes.
FINISH
WALL TILES
BATHROOMS and KITCHEN walls tiled with top quality ceramic tiles to be chosen by the client from series no.3, including 2 decorative border tiles in the bathrooms and 1 in the kitchen. (Limit of 1 tile model per KITCHEN-BATHROOM).
FLOOR TILES
Flooring: Top quality rectified porcelain tiles to be chosen by the client from series no.3, with the option of including a decorative border tile in the living room (The length of this decorative border should not exceed 12 metres. Limit of 4 tile mode
INSURANCES
BUILDING INSURANCE
Free 1st year building insurance policy
INSURANCE FOR 10 YEARS
The house has an insurance that guarantees any damage made to the house due to faults and flaws caused by or affecting the foundations or structure of the building and that threaten its resistance and safety, for a period of 10 years.
WARRANTIES
Warranty of the amounts of money handed over by the client by means of a bank guarantee or consolidation policy issued by an important bank or insurance company.
OTHERS
CUSTOMIZED DESIGN
Own Architecture Department where you can design your personal project or adapt some of our recommended designs.
MATERIAL SELECTION
Freedom of choice of materials and finishings of your house. Customized service and advice by our Customer Service Department.
CUSTOMER SERVICE
Personalized follow-up service for the client from the contract signing until the conclusion of the guarantee period.
Inspection for handing over of keys accompanying the client and providing customized service in several languages.
VAPFNET
Private access intranet for clients, thought to provide more information and transparency during the purchase process of your house, where you will find data of your house, pictures of the construction development, can look up signed contracts, ....
CONTROL DE CALIDAD
Geotechnical study, Quality control plan of the project, Laboratory trials, monitoring of the quality of construction execution by an approved Technical Control Organization, professional direction by Architect and Quantity Surveyor.
Technical inspection for internal control prior to handing over of the house to the client.
DOCUMENTATION
Building project, Safety and Health Plan, Construction Permit, Construction Completion Certificate by the Architect, First Occupancy Certificate
ALL INCLUSIVE SERVICES
Execution fees of the mains of the different supplies connections.
Cession of the property of a right of water
Installation of a water meter
Installation of a pressure reducer
Management of the Inspection visit by Iberdrola
Management and fees of Industry Inspection (gas) (if this applies)
Management of direct debiting of water, electricity and community receipts.
Electricity and water consumption bills since the handover of the apartment until both supplies are contracted on behalf of the client
Management of the Registration in the Land Registry.
Private postbox in the postbox shelters of the shopping centres.
Payment of the refuse collection tax of the year of the title deed signing.
Payment of the Yearly Property Tax of the year of the title deed signing.
Payment of the homeowners fees (community of owners previously existing) the year in which the deed is signed.
Use of cookies We use our own cookies and those of third parties to improve of services. If you continue browsing, we consider that you accept our COOKIE POLICY.